金沙集团1862成色(澳门)股份有限公司-企业百科

Impregnating Insulation Varnish Casting & Potting Resins Surface Coat Glass Fiber Wire Varnish Encapsulating Resins Structural Adhesive Balancing Clay Back

For Small Motors

Our products offer a wide range of varieties and have strong applicability. They also excel in electrical performance, catering to various requirements for insulation treatment in small motors.Among them, water-based varnish meets environmental requirements, while epoxy varnish and unsaturated polyester varnish demonstrate exceptional performance.

Product Code	Base Resin	Unique Characteristics	Viscosity @25℃ mPa·s	Mix Ratio	Cure Schedule	Application Methed	Thermal Class
R-1140	Unsaturated polyester	High film strength, high bond strength, low impregating loss, excellent PDIV performance	110-170	Single	140℃@2-4h	DIP/Vacuum continuous impregnation/VPI	180℃
R-510	Unsaturated polyester	Fast curing, high mechanical strength, high heat resistance	250-450	100:1.5	130℃@0.5-1h	TRICKLE/ROLL DIP	180℃
R-1146	Epoxy resin	Environmental friendly, low VOC, well penetration and high bond strength	600-1000	100:80	150℃@0.5-1h	TRICKLE/ROLL DIP	155℃
R-831	Epoxy resin	Fast curing, good moisture resistance, excellent impregnation properties, good film fullness	20-50	1:1	130℃@0.5-2h	DIP/Continuous impregnation	180℃
R-410	Epoxy resin	Fast curing, good insulation, high strength varnish film	40-110	1:1	130℃@0.5-1h	DIP/Continuous impregnation/ROLL DIP	180℃
R-510-2	Unsaturated polyester	Refrigerant resistance (e.g. R22/ R410/ R12/ R134a), full insulation prpoerty, high mechanical strength	150-260	Single	150℃@4-6h	DIP/Vacuum continuous impregnation/VPI	180℃
R-510-Z	Unsaturated polyester	Halogen-free flame retardant (class UL94-V0), excellent insulation and high strength	110-210	Single	150℃@4-6h	DIP/Vacuum continuous impregnation/VPI	180℃
R-510-8	Unsaturated polyester	Fast curing, good impregnation, high heat resistance, high adhesion	450-700	100:2	150℃@0.5-1h	TRICKLE/ROLL DIP/DIP	180℃
R-510-U	Unsaturated polyester	Electrically heated light curing (UV), good film fullness, excellent penetration	150-260	Single	150℃@1-2h	Electric heating light curing/DIP	180℃
R-510-9	Unsaturated polyester	Environmentally friendly, low VOC, excellent insulation, high adhesion, excellent PDIV performance	360-570	Single	150℃@3-5h	DIP/Vacuum continuous impregnation/VPI	180℃
R-611	Heat Resistant Polyester	high heat resistance, high thermal conductivity, fast curing, high strength, and good penetration	20-60	100:1	150℃@2-4h	VI	200℃
R-405-8	Water-based Polyester Resin	Fast curing speed, environmental friendly, low odour, low VOC emission, good adhesion, good rust resistance	40-520	Single	130℃@2h	DIP/VPI	155℃
R-405	Water-based Polyester Resin	High solids content (≥60%), low odour, good adhesion, good rust resistance	1500-2500	Single	130℃@2h	DIP/VPI	180℃
R-405-3	Water-based Epoxy Resin	Low temperature and fast drying, no odour, low VOC emissions, good adhesion	20-50	4:1	110℃@2h	DIP/TRICKLE	155℃/180℃
R-405-6	Water-based Epoxy Resin	Environmental friendly, no odour, no VOC emissions, good adhesion, high strength, refrigerant resistance	20-90	Single	150℃@2h	DIP/VPI/TRICKLE	180℃
R-405-7	Modified Water-based Epoxy Resin	Low odour, fast curing, good adhesion, good rust resistance	20-70	Single	120℃@2h	DIP	155℃/180℃
R-405-12	Water-based Epoxy Resin	Low odour, low VOC emissions, fast curing, good adhesion	20-50	Single	130℃@2h	DIP/TRICKLE	155℃/180℃
R-405-5	Water-based Acrylic Resin	Low odour, fast curing, good adhesion, good rust resistance	20-110	Single	130℃@2h	DIP	155℃

message